Long Bolster Pillow Style

Stylish Long Bolster Pillow

Daybed Bolster Pillows Design

Criteria for Selection of Daybed Bolster Pillows

March 21, 2019 Bolster Pillow

DIY Bolster Pillow Cover

Bolster pillow cover can to match or contrast with the bed cover or upholstery. First, measure the length and diameter of the form of strengthening. Add 1 inch to both of these measurements. Cut a rectangle with these dimensions to cover the sides of the head. Place the box on a table with the right side up and the ends corresponding to the length measurement on the sides. Fold the rectangle in half so that the side ends together.

Modern Bolster Pillow Cover

Modern Bolster Pillow Cover

Sewing sewing together the sides 1/2 inch side ends. Leave an opening of 8 inches in the center of the seam. Measure the diameter of the end of the way of strengthening. Draw a circle the diameter on a piece of paper. Draw a circle around the outside 1/2 inch line pencil to make a larger circle. Pin the circle to the tube ends with right sides together. The edges of the circles should be even with the edges of the tube.

12 Inspiration Gallery from DIY Bolster Pillow Cover

Image of: Bolster Pillow Cover 8×30
Image of: Bolster Pillow Cover Brown
Image of: Bolster Pillow Cover Gray
Image of: Bolster Pillow Cover Ideas
Image of: Bolster Pillow Cover Pattern
Image of: Bolster Pillow Cover Red
Image of: Bolster Pillow Cover
Image of: Daybed Bolster Pillow Cover
Image of: Appealing Decorative Bolster Pillow Cover
Image of: Minimalist DIY Bolster Pillow Cover
Image of: Elegant Bolster Pillow Cover
Image of: Modern Bolster Pillow Cover
 

Sew the circles to the ends of the tube seam 1/2 inch from the edges. Clip 7 seam allowances circles cut perpendicular to the seam line every 1/4 inch around the circle. Clip about sewing, but it is not enough. The seam allowances are part of the fabric that extends beyond the seam. Turn the cover right side out and insert the shape reinforced. Hand sew the opening closed. Bolster pillow cover project was done!

Comments are closed.